1x95
1x95
Copper wire armoured LV cable, PVC sheathed for fixed installations. Rated voltage 0.6/1 KV
Read more- Nexans ref. : 21095EXZVCB09BA0
Description
Description
Standards
-
InternationalIEC 60332-1; IEC 60502-1
-
NationalEP-MS-P4/S3-040
Application
These power cables are used for electricity supply in low voltage installation systems.
They are well adapted to underground use in industrial applications where chemical and mechanical protections are needed (refinery areas, chemical plant…)
This group is fully comply with IEC 60502-1 and Kahramaa EP-MS-P4/S3-040 specs.
Design
- Conductor
Stranded bare copper class 2 acc. to IEC 60228
- Insulation
Cross Linked Polyethylene "XLPE"
- Inner Sheath or Bedding
Lapped bedding or extruded PVC
- Armour
Copper Wire Armour "CWA" / Water swelling tape above and under the armour layer
- Outer Sheath
Polyvinyl Chloride "PVC", Flame retardant to IEC60332 or equivalent
Installation Conditions:
- Air Temperature : 30 Deg.
- Ground Temperature: 20 Deg.
- Soil Thermal Resistivity : 2.5 k.m/w
- Depth of lay : 0.7 m
All dimensions have tolerance +- 7 %
Marking
no. of cores x conductor sizes mm2 Cu / XLPE / CWA / PVC 600/1000 V IEC 60502-1 MADE IN QATAR QICC-Nexans Year Meters
Custom marking available
Characteristics
Characteristics
Construction characteristics
Construction characteristics
Conductor material
Copper
Conductor shape
Circular
Insulation
XLPE (Cross-linked Polyethylene)
Inner sheath
PVC
Armour type
Copper Wires
Outer sheath
PVC
Colour
Black
Conductor flexibility
Stranded class 2
Halogen free
No
Dimensional characteristics
Dimensional characteristics
Number of cores
1
Conductor cross-section
95 mm²
Approximate weight
1525 kg/km
Ground conductor cross-section
- mm²
Nominal outer diameter
25.0 mm
Electrical characteristics
Electrical characteristics
Rated Voltage Uo/U (Um)
0,6/1 kV
Max. DC resistance of the conductor at 20°C
0.193 Ohm/km
Permissible current rating in open air
342 A
Permissible current rating when buried
226 A
Voltage drop, single phase
0.47 V/A.km
Usage characteristics
Usage characteristics
Minimum Bend Radius - Installed
8 mm
Max. conductor temperature in service
90 °C
Short-circuit max. conductor temperature
250 °C
Bending factor when laying
15 (xD)
Bending factor when installed
8 (xD)
Resources
Resources
Our websites
Select your country to find our products and solutions
-
Africa
- Africa
- Ghana
- Ivory Coast
- Morocco
- North West Africa
- Americas
- Asia
- Europe
- Oceania